SWCP Support Wiki - User contributions [en]

Blacklist

2010-12-01T21:35:27Z

Kanabek:

If you wish to never receive an e-mail from a person ever again, you can add them to the server-side blacklist in our spam filter.

To do this:

===Add a Blacklist Entry===
# Go to our website at [http://www.swcp.com www.swcp.com], and on the left hand side, under Main Menu, click on "[https://members.swcp.com/mailfilter/ Spam Filter]".
# Log in using the same username and password for the e-mail account that you wish to set up filtering for and click "Login".
# If you have not yet turned on filtering for your account, do do by clicking the "Yes" radio (round) button beside "Enable filtering for this account?", and click "Submit all unsaved changes". A box will appear indicating "Changes saved", click on the "OK" button.
# If you are not already in Advanced View, click on the "Switch to Advanced View" button.
# On the left-hand side of the screen, click on "Blacklist".
# Click on the "enabled" radio button beside "Blacklisting".
#Click "Add".
# The "Add new entry" box will open. In the "Sender address" box, enter the e-mail address that you Do Not Want To Ever Receive Email From Again. Click "Submit".
# Click "Submit all unsaved changes". A box will appear indicating "Changes saved", click on the "OK" button.
# You can add more addresses if you wish (step 7, above), or if you are done, you can click "Logout".

(Please Note: Any time there are unsaved changes, they will appear in Red on the blue status bar near the top of the window. Click "Submit all unsaved changes." to save them.)

===Edit or Delete an Exising Entry===
# Follow steps 1-2 under "Add a Blacklist Entry", above, to log in.
# On the left-hand side of the screen, click on "Blacklist".
# Click on the email address entry in the list (in the center box) to highlight it. It will turn blue when you to so.
#* To Edit this entry, click the "Edit" button. You can then edit the entry, just as you originally created the entry. Click "OK" when you are finished.
#* To Delete this entry, click the "Delete" button, and that entry will be deleted.
# Click "Submit all unsaved changes". A box will appear indicating "Changes saved", click on the "OK" button.
# You can make further changes (as above), or if you are done, you can click "Logout".

===Blacklist all===
Please note: The "All" option under "Blacklisting" will block All Email, including email that you would like to receive, unless you add Each And Every Email Address that you would like to receive e-mail from in the "Whitelist" filter. We do not recommend using the "Blacklisting: All" option.

===Video===
There is a video of this that can be viewed here: [http://www.youtube.com/watch?v=3rMap8X_t6A http://www.youtube.com/watch?v=3rMap8X_t6A].
* It can also be downloaded here under "''Blacklist an E-Mail Address (Quick and Easy)''": [http://www.swcp.com/content/view/132/170/ http://www.swcp.com/content/view/132/170/].

[[Category: Spam Filter]]

Whitelist

2010-12-01T21:32:31Z

Kanabek: Created page with 'If you wish to always receive an e-mail from a particular email address, you can add them to our server-side whitelist in your spam filter. To do this: ===Add a Whitelist Entr...'

If you wish to always receive an e-mail from a particular email address, you can add them to our server-side whitelist in your spam filter.

To do this:

===Add a Whitelist Entry===
# Go to our website at [http://www.swcp.com www.swcp.com], and on the left hand side, under Main Menu, click on "[https://members.swcp.com/mailfilter/ Spam Filter]".
# Log in using the same username and password for the e-mail account that you wish to set up filtering for and click "Login".
# If you have not yet turned on filtering for your account, do do by clicking the "Yes" radio (round) button beside "Enable filtering for this account?", and click "Submit all unsaved changes". A box will appear indicating "Changes saved", click on the "OK" button.
# If you are not already in Advanced View, click on the "Switch to Advanced View" button.
# On the left-hand side of the screen, click on "Whitelist".
# Click the box that says "Enable Whitelisting".
# Click "Add" on the right-hand side of the screen.
# The "Add new entry" box will open. In the "Sender address" box, enter the e-mail address that you want to always get e-mail from. Under the "Save to local folder" box "INBOX" should be selected by default. Click "Submit".
# Click "Submit all unsaved changes". A box will appear indicating "Changes saved", click on the "OK" button.
# You can add more addresses if you wish (step 7, above), or if you are done, you can click "Logout".

===Edit or Delete an Exising Entry===
# Follow steps 1-2 under "Add a Whitelist Entry", above, to log in.
# On the left-hand side of the screen, click on "Whitelist".
# Click on the email address entry in the list (in the center box) to highlight it. It will turn blue when you to so.
#* To Edit this entry, click the "Edit" button. You can then edit the entry, just as you originally created the entry. Click "OK" when you are finished.
#* To Delete this entry, click the "Delete" button, and that entry will be deleted.
# Click "Submit all unsaved changes". A box will appear indicating "Changes saved", click on the "OK" button.
# You can make further changes (as above), or if you are done, you can click "Logout".

(Please Note: Any time there are unsaved changes, they will appear in Red on the blue status bar near the top of the window. Click "Submit all unsaved changes." to save them.)

===Video===
There is a video of this that can be viewed here: [http://www.youtube.com/watch?v=Lc6k9dTcZvc http://www.youtube.com/watch?v=Lc6k9dTcZvc].
* It can also be downloaded here under "''Whitelist an E-Mail Address (Quick and Easy)''": [http://www.swcp.com/content/view/132/170/ http://www.swcp.com/content/view/132/170/].

[[Category: Spam Filter]]

Category:Spam Filter

2010-12-01T20:49:31Z

Kanabek: Created page with 'Our server-side Spam Filter can filter out spam, but it can also perform forwarding, automatic replies, set up blacklists and whitelists, and do keyword filtering. You can access...'

Our server-side Spam Filter can filter out spam, but it can also perform forwarding, automatic replies, set up blacklists and whitelists, and do keyword filtering. You can access it here: [https://members.swcp.com/mailfilter/ https://members.swcp.com/mailfilter/]

(Articles listed below, more being added! Contact tech support if you need help with something that is not yet listed; thanks!)

Blacklist

2010-12-01T20:27:37Z

Kanabek:

If you wish to never receive an e-mail from a person ever again, you can add them to the server-side blacklist in our spam filter.

To do this:

# Go to our website at [http://www.swcp.com www.swcp.com], and on the left hand side, under Main Menu, click on "[https://members.swcp.com/mailfilter/ Spam Filter]".
# Log in using the same username and password for the e-mail account that you wish to set up filtering for and click "Login".
# If you have not yet turned on filtering for your account, do do by clicking the "Yes" radio (round) button beside "Enable filtering for this account?", and click "Submit all unsaved changes". A box will appear indicating "Changes saved", click on the "OK" button.
# If you are not already in Advanced View, click on the "Switch to Advanced View" button.
# On the left-hand side of the screen, click on "Blacklist".
# Click on the "enabled" radio button beside "Blacklisting".
#Click "Add".
# The "Add new entry" box will open. In the "Sender address" box, enter the e-mail address that you Do Not Want To Ever Receive Email From Again. Click "Submit".
# Click "Submit all unsaved changes". A box will appear indicating "Changes saved", click on the "OK" button.
# You can add more addresses if you wish (step 7, above), or if you are done, you can click "Logout".

(Please Note: Any time there are unsaved changes, they will appear in Red on the blue status bar near the top of the window. Click "Submit all unsaved changes." to save them.)

===Blacklist all===
Please note: The "All" option under "Blacklisting" will block All Email, including email that you would like to receive, unless you add Each And Every Email Address that you would like to receive e-mail from in the "Whitelist" filter. We do not recommend using the "Blacklisting: All" option.

===Video===
There is a video of this that can be viewed here: [http://www.youtube.com/watch?v=3rMap8X_t6A http://www.youtube.com/watch?v=3rMap8X_t6A].
* It can also be downloaded here under "''Blacklist an E-Mail Address (Quick and Easy)''": [http://www.swcp.com/content/view/132/170/ http://www.swcp.com/content/view/132/170/].

[[Category: Spam Filter]]

2009-07-01T20:43:25Z

Web Directory Access Control

2009-02-19T21:51:56Z

Kanabek:

Southwest Cyberport's ''Web Directory Access Control tool'' can be used to password protect a web directory on our servers.

You can access it through our [https://members.swcp.com/ Member Tools page], (then click on '''Website Access Control''' in the lower right-hand portion of the screen).

There are instructional screencasts available at [http://www.swcp.com/content/view/126/9/ http://www.swcp.com/content/view/126/9/].

There are also instructions on the main page of the Web Directory Access Control tool itself.:

==Introduction==
Using this application, you will be able to restrict access to your SWCP website(s) to users of your choice. Here you will have control of the names and passwords that are used to gain access. You may apply access control to your entire web space, or you may limit access control to one or more subdirectories. Giving certain users access to one subdirectory while giving another set of users access to another directory is made simple by putting users into groups, then applying one or more groups to a directory.

The links in the Web Directory Access Control tool are ordered by the sequence you need to follow in order to accomplish this.

===Your Users:===
'''Create one or more users'''
Go to the Users page by following the Your Users link ''on the Web Directory Access Control tool page''.

Click the 'Add new user' button on that page to enter the new login name and the password for a person you want to allow to access your web pages. You may create as many users as you like, provided that the names are all different.

Any users that you have defined already will be displayed in the table, and available for selection in the drop-down list. Select one of the usernames on the drop-down list, and you will be able to

* rename the user
* change the user's password
* delete the user

As soon as you have created at least one user, you will be able to make use of the Groups page and the Directories page.

===Your Groups:===
'''Create one or more groups (optional)'''

Go to the Groups page by following the Your Groups link ''on the Web Directory Access Control tool page''.

Click the 'Add new group' button on that page to enter the new group name, and to choose which users will be members of that group. You may create as many groups as you like, provided that the names are all different. A group may have any or as many members as you have defined users, even only a single user if you wish.

Any groups that you have defined already will be displayed in the table, and available for selection in the drop-down list. Select one of the group names on the drop-down list, and you will be able to

* rename the group
* change membership in the group
* delete the group

As soon as you have created at least one group, you will be able to make use of the groups feature on the Directories page.

===Your Directories:===
'''Apply access control to a directory'''

Go to the Directories page by following the Your Directories link ''on the Web Directory Access Control tool page''.

Wait a few moments, and all of the subdirectories in your webspace (everything under your public_html directory) will be displayed in the form of a folder tree on the left-hand side of your browser window.

Choose the directory that interests you by clicking its name in the tree; a form for access control settings will then be displayed on the right-hand side of the window. Any access control settings that are currently in place on that directory will be shown and changeable.

You may assign access to individual users, and/or to any groups that you have created. If you check the checkbox next to "Grant access to all of your defined users", all users you have defined will be able to log in to see web pages in the selected directory after you click Submit. The Groups and Users boxes will become invisible while this option is chosen.

Web Directory Access Control

2009-02-19T21:50:04Z

Kanabek:

Southwest Cyberport's Web Directory Access Control tool can be used to password protect a web directory on our servers.

You can access it through our [https://members.swcp.com/ Member Tools page], (then click on '''Website Access Control''' in the lower right-hand portion of the screen).

There are instructional screencasts available at [http://www.swcp.com/content/view/126/9/ http://www.swcp.com/content/view/126/9/].

There are also instructions on the main page of the Web Directory Access Control tool itself.:

==Introduction==
Using this application, you will be able to restrict access to your SWCP website(s) to users of your choice. Here you will have control of the names and passwords that are used to gain access. You may apply access control to your entire web space, or you may limit access control to one or more subdirectories. Giving certain users access to one subdirectory while giving another set of users access to another directory is made simple by putting users into groups, then applying one or more groups to a directory.

The links in the Web Directory Access Control tool are ordered by the sequence you need to follow in order to accomplish this.

===Your Users:===
'''Create one or more users'''
Go to the Users page by following the Your Users link ''on the Web Directory Access Control tool page''.

Click the 'Add new user' button on that page to enter the new login name and the password for a person you want to allow to access your web pages. You may create as many users as you like, provided that the names are all different.

Any users that you have defined already will be displayed in the table, and available for selection in the drop-down list. Select one of the usernames on the drop-down list, and you will be able to

* rename the user
* change the user's password
* delete the user

As soon as you have created at least one user, you will be able to make use of the Groups page and the Directories page.

===Your Groups:===
'''Create one or more groups (optional)'''

Go to the Groups page by following the Your Groups link ''on the Web Directory Access Control tool page''.

Click the 'Add new group' button on that page to enter the new group name, and to choose which users will be members of that group. You may create as many groups as you like, provided that the names are all different. A group may have any or as many members as you have defined users, even only a single user if you wish.

Any groups that you have defined already will be displayed in the table, and available for selection in the drop-down list. Select one of the group names on the drop-down list, and you will be able to

* rename the group
* change membership in the group
* delete the group

As soon as you have created at least one group, you will be able to make use of the groups feature on the Directories page.

===Your Directories:===
'''Apply access control to a directory'''

Go to the Directories page by following the Your Directories link ''on the Web Directory Access Control tool page''.

Wait a few moments, and all of the subdirectories in your webspace (everything under your public_html directory) will be displayed in the form of a folder tree on the left-hand side of your browser window.

Choose the directory that interests you by clicking its name in the tree; a form for access control settings will then be displayed on the right-hand side of the window. Any access control settings that are currently in place on that directory will be shown and changeable.

You may assign access to individual users, and/or to any groups that you have created. If you check the checkbox next to "Grant access to all of your defined users", all users you have defined will be able to log in to see web pages in the selected directory after you click Submit. The Groups and Users boxes will become invisible while this option is chosen.

2008-06-05T19:20:21Z

Kanabek:

===How do I order stand alone Qwest DSL (no phone line included)===
Article:301
Created:2004-08-12 17:14:55
Categories:
DSL

====Question or Symptom====
You want a Qwest DSL line and you're in range of a Qwest DSL DSLAM but you don't have a Qwest telephone line.

====Resolution====
You can order Qwest DSL's "Stand-Alone" service. Qwest is willing to install a DSL line without dial-tone (telephone service) for a small additional charge each month.

Call Qwest DSL "Safe Harbor" Number (for residential lines: 1-800-348-1688; for commercial lines: 1-800-603-6000)

Then tell the operator you speak with that you wish to order stand alone DSL. You will need the following information:

Address where service is desired.
Name of the owner of the DSL service.
SSN of the owner.

'''Specify that you want to have Southwest Cyberport as the ISP for this service.''' If the Qwest Rep tells you that you cannot have Southwest Cyberport as your ISP, please either ask for a supervisor, or call Southwest Cyberport at (505) 232-7992, and ask for assistance.

At the end of the call you will be given a digital phone number, though you don't really get a phone line. Please give this information to dsl@swcp.com so we can move your order forward.