Jamii: /* Resolution */

2008-06-04T05:08:04Z

Resolution

← Older revision		Revision as of 23:08, 3 June 2008
Line 16:		Line 16:
	====Resolution====		====Resolution====
	The fix for that is to log in to the router. Telnet to the external IP address		The fix for that is to log in to the router. Telnet to the external IP address
	of the router. The password initially on the router is 'admin'. You may want		of the router. The password initially on the router is 'admin'. You may want
	to change that.		to change that.

	Once you are logged in to the router then what you want to do is to change the		Once you are logged in to the router then what you want to do is to change the

Jamii: New page: ===How do you change the internal IP address on the Flowpoint router?=== Article:86 Created:2001-01-31 18:13:26 Categories: routing DSL ====Question or Symptom==== The Flowpoint ...

2008-06-04T05:07:31Z

New page: ===How do you change the internal IP address on the Flowpoint router?=== Article:86 Created:2001-01-31 18:13:26 Categories: routing DSL ====Question or Symptom==== The Flowpoint ...

New page

===How do you change the internal IP address on the Flowpoint router?===
Article:86
Created:2001-01-31 18:13:26
Categories:
routing
DSL

====Question or Symptom====
The Flowpoint routers that have been going out lately (10/4/00) have an
internal ip address of 192.168.254.1, however customers might use
192.168.0 as their network instead with a subnet of 255.255.255.0. They
might also use another set of private ips like the 10.0.0. If that is so
you want to change the internal ip address.

====Resolution====
The fix for that is to log in to the router. Telnet to the external IP address
of the router. The password initially on the router is 'admin'. You may want
to change that.

Once you are logged in to the router then what you want to do is to change the
internal IP address by doing the following:

eth ip addr 'ipaddr' 'ipnetmask'

For example:

eth ip addr 192.168.0.1 255.255.255.0

Once you have typed that in you want to check to see if it has been changed.
You do that by typeing:

eth list

which will give you a list of ethernet settings. The line we are interested
in is:

IP address/subnet mask............... 192.168.0.2/255.255.255.0

That will show you if you have changed this successfully. At that point do the
following:
save
reboot

That will save the setting and restart the router.

====Related KB articles====
[[KB 77]] Port forwarding with Efficient/Flowpoint Router

KB 86 - Revision history

Jamii: /* Resolution */

Jamii: New page: ===How do you change the internal IP address on the Flowpoint router?=== Article:86 Created:2001-01-31 18:13:26 Categories: routing DSL ====Question or Symptom==== The Flowpoint ...