View source for KB 304

===How do I get better debug info from the broadmax (the telnet way)===
 Article:304
 Created:2004-08-30 15:14:44
 Categories:
   DSL

====Question or Symptom====
You have a broadmax router, you wish to look at statistics for this
device and their meainings in a real sense so you know if your router is
having line trouble.


====Resolution====
Telnet into the broadmax in question.  Here is a summary of commands with
discriptions of the important numbers that may be causing you trouble.  It
will be helpful to you to be transmitting data (i.e. a down/upload) so you can
see the error counters increasing or not.  
  
  *************
  # Gives stats for the dsl interface
  $ get dsl stats cntrs
    
  Near SEF            : 0              Near LOS      : 0              
  Far SEF             : 0              Far LOS       : 0              
  Near FEC Interleave : 1585290        Near FEC Fast : 0              
  Far FEC Interleave  : 8511           Far FEC Fast  : 0              
  Near CRC Interleave : 502            Near CRC Fast : 0              
  Far CRC Interleave  : 17             Far CRC Fast  : 0              
  Near NCD Interleave : 4              Near NCD Fast : 0              
  Far NCD Interleave  : 0              Far NCD Fast  : 0              
  Near HEC Interleave : 403            Near HEC Fast : 0              
  Far HEC Interleave  : 12             Far HEC Fast  : 0              
  Near OCD Interleave : 36             Near OCD Fast : 0              
   
  SEF = Severely Errored Frame (SEF) defects.
  FEC = Forward error correction (FEC).
  CRC = Cyclic Redundancy Check
  NCD = NCD (no cell delineation)
  HEC = Header Error Control (HEC) violations.
  OCD = The number of Out of Cell Delineation events since the last reset. An
     OCD event is declared when seven consecutive ATM cells have Header Error
      Control (HEC) violations.
  *******************
  
  # Will give the stats for each interface
  get interface stats
  # Shows just one of the interfaces listed above
  get interface stats ifname <ifname_from_above>
  
  $get interface stats ifname aal5-0
  
  Interface          : aal5-0         
  Description        : aal5-0         
  Type               : AAL5       Mtu                        : 9188       
  Bandwidth          : 0          Phy Addr                   : 00:00:00:00:00:00
  Admin Status       : Up         Operational Status         : Up         
  Last Change(sec)   : 27         Time since Last Change(sec): 140761     
  In Octets          : 76726206   Out Octets                 : 29301312   
  In Discards        : 0          Out Discards               : 0          
  In Errors          : 3          Out Errors                 : 4          
  In Ucast Pkts      : 298846     Out Ucast Pkts             : 359311     
  Non-Ucast Pkts     : 0          Out Non-Ucast Pkts         : 0          
  Out Q Len          : 0          Unknown Prot Pkts          : 0       
  
  # Will tell you the subscriber up/down speed
  # This one is 640/352
  $get dsl params
   
  Vendor ID            : 0039     
  Revision Number      : T93.3.23                        
  Serial number        : 304-10V1.02                     
  Self Test            : Passed        Framing Structure     : Framing-3
  Standard             : T1.413        Trellis Coding        : Enable   
  Local Tx. Power(dB)  : 12.31         Remote Tx.Power(dB)   : 14.25    
  Local Line Atten(dB) : 63.5          Remote Line Atten(dB) : 31.5     
  Local SNR Margin(dB) : 5.0           Remote SNR Margin(dB) : 6.0      
  Up SValue            : 8             Down SValue           : 16       
  Up DValue            : 8             Down DValue           : 4        
   
           UpIntrlvd UpFast DownIntrlvd DownFast
  AS0(kbps): -         -      352         0       
  AS1(kbps): -         -      0           0       
  LS0(kbps): 640       0      -           -       
  LS1(kbps): 0         0      -           -       
  RValue   : 16        0      16          0       


====Related KB articles====
  [[KB 265]] How to configure a Broadmax Linkmax Router the telnet way.

  [[KB 273]] Configuring the broadmax